HydraNFC

HydraNFC

소개
The HydraNFC is an incredibly powerful and flexible 13.56MHz NFC sniffing/reading/writing/emulating platform for 13.56MHz tags.
The Hydra NFC is less expensive, more powerful/extensible than Proxmark3 Hardware and does not require an FPGA (all is done by the MCU Cortex M4F@168MHz with the help of HydraBus with an ultra-fast unique algorithm to sniff & decode in real-time PICC/PCD NFC cards).

Functionality in a glance
Below is a non-exhaustive list of what the HydraNFC brings to the table.
Ultra-Portable
Only 33 grams and 54x35x13 mm
Full Throttle NFC interaction
Direct Mode 0 access for unrestricted development
Ultra-Capable Out of the Box
Full support for all common NFC cards, real-time sniffing
Technical Specs
In addition to all HydraNFC specifications:
Supports Near Field Communication (NFC) Standards NFCIP-1 (ISO/IEC 18092) and NFCIP-2 (ISO/IEC 21481)
Completely Integrated Protocol Handling for ISO15693, ISO18000-3, ISO14443A/B, and FeliCa
Integrated Encoders, Decoders, and Data Framing for NFC Initiator, Active and Passive Target Operation for All Three-Bit Rates (106 kbps, 212 kbps, 424 kbps) and Card Emulation
RF Field Detector With Programmable Wake-Up Levels for NFC Passive Transponder Emulation Operation
Programmable System Clock Frequency Output (RF, RF/2, RF/4) from 13.56-MHz Crystal
Programmable Modulation Depth
Dual Receiver Architecture With RSSI for Elimination of “Read Holes” and Adjacent Reader System or Ambient In-Band Noise Detection
Programmable Output Power: +20 dBm (100 mW), +23 dBm (200 mW)
Support any protocols under 13.56 MHz with modulation depth OOK (100%) or ASK (from 7% to 30%)
Support low-level Direct Mode 0 (Raw RF Sub-Carrier Data Stream) or intermediate level (for special tags, not ISO compliant like MIFARE Classic® …) Special Direct Mode for TX and Direct Mode 1 for RX using ISO encoders/decoders without protocol framing
Detailed functionality
Support of microSD (FAT16/FAT32) card up to 32GB
Virtual Serial Port access through micro USB with VT100 terminal/shell
Basic UID read for Vicinity/ISO15693
Basic UID read for ISO14443-A/MIFARE ® card 4 or 7bytes UID
Read MIFARE Ultralight® tag content (full dump)
Tag Emulation UID ISO14443A & MIFARE Classic® 1K
Sniffer mode in an autonomous/stand-alone mode
Real-time ISO14443A sniffer mode

What’s included
Hardware
1x HydraBus (60mm x 37mm)
1x HydraNFC Shield
1x Case
1x Pre-tuned Antenna
Shipping & Packaging
Each HydraNFC is dispatched from Europe – no need to worry about slow shipping times, import duties or damaged goods.
Packed in a sturdy compact box.
We provide worldwide shipping with express options.