AirDrive Serial Logger Max
Introduction
Our AirDrive Serial Logger Max is arguably the world’s most advanced hardware serial logger, providing asynchronous bi-directional RS-232 high-speed logging with built in wifi configuration and egress.
Not only acting as a wifi access point, the AirDrive Serial Logger Max also acts as a wireless bridge, allowing the device itself to stream captured data in real time, dispatch report emails and timestamp logs.
Setup is easy – connect the AirDrive Serial Logger to the target device, connect power via the provided USB-B cable, and the device will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.
It can be accessed and controlled via any Wi-Fi capable device such as a computer, laptop, tablet, or smartphone.
The device provides:
100% Hardware-based logging
8GB of encrypted storage
Configurable and controllable via wifi
Undetectable by all anti-virus software suits
Latest firmware pre-installed
Functionality in a glance
Below is a non-exhaustive list of capabilities of the AirDrive Serial Logger Max.
Undetectable & Discreet
Masquerades as a USB drive if plugged in. Control remotely via your phone.
Secure & Encrypted
Recorded data is encrypted, impossible to retrieve without authorization.
Real-time over-the-air streaming
Receive data in real time, emailed reports and much more.
Technical Specs
Key Features
61mm x 31mm x 20mm
RX/TX Simultaneous Logging
Baud rates up to 115200 bps
8GB Internal Flash Memory
Wifi Interface: WEP, WPA, WPA-2 security
Wifi-Bridge allows for:
Real time captured data streaming
Automatic emailed log reports
Timestamping
Off-site remote-control
Encrypted internal memory
Masquerades as an 8GB flash drive
Applications & Supported Devices
Any RS-232 Device (terminals, mice, modems)
Reverse-engineering data exchanges
Sensor & peripheral logging
Serial debugging
Management Interface
Device management via web-interface. No apps or software required
Management panel accessible from any computer, telephone, etc
Over-the-air data exfiltration
What’s included
1x AirDrive Serial Logger Max
USB-B side side socket for power
1x Instruction Manual
Shipping & Packaging
Each AirDrive Serial Llogger Max is dispatched from Europe – no need to worry about slow shipping times, import duties or damaged goods.
Packed in a sturdy compact box.
We provide world-wide shipping with express options.
Feature AirDrive Serial Logger AirDrive Serial Logger Max
Internal Memory 16MB 8GB
Wifi Access Point ✔ ✔
Wifi Bridge Capability ✘ ✔
Time-stamping ✘ ✔
Real-time streaming ✘ ✔
Email Reporting ✘
✔
Flash Drive Capability ✘ ✔
Dimensions 61mm x 31mm x 20mm
38mm x 20mm x 12mm
BugBlat miniSniffer 2-139
Compact, cross-platform hardware USB Protocol Analyzer.
Capture, debug and analyse USB connections easily and economically.
Introduction:
The BugBlat miniSniffer v2 is a powerful USB Sniffer / Protocol Analyser and USB inspection and debugging device.
The V2 combines the performance and large on-board capture buffer (256MB) of the ezSniffer, and the compact form-factor of the miniSniffer V1.
Compact, powerful and cross-platform, it is bundled with a mature cross-platform software suite for capturing and displaying USB traffic.
The miniSniffer 2 is a special purpose logic analyzer. An on-board FPGA samples the USB signals, compresses the samples, and sends the compressed data to an analysis PC via the FX2LP’s buffered high speed USB link. Software on the analysis computer decompresses the samples and converts them into a visual flow.
Data can be sniffed and saved onboard for later analysis : the miniSniffer V2 has 256MB of storage, and supports on-the-fly compression to double your effective storage.
Functionality in a glance:
Below is a non-exhaustive list of the miniSniffer’s advantages:
Budget USB Analysis
Full-speed and high-speed USB Analysis
Fully Cross-Platform
Bundled software works on Windows, Mac and Linux
Pocket-sized Inspection
Highly capable yet half the size of a credit card.
Detailed functionality
Disconnect and reconnect USB devices. This makes it straightforward to capture startup packets, including descriptors.
Compresses captured data. It can capture up to 256MB of compressed data.
Sniff USB Full-Speed (FS) device traffic at 12Mbit/s.
Sniff USB High-Speed (HS) device traffic. 480Mbit/s High-Speed devices power up as FS devices and then attempt to move up to HS. The ezSniffer prevents HS devices moving from FS to HS, so the ezSniffer can sniff these devices as well.
Technical Specifications:
Size: 50mm x 33mm (2.0″ x 1.3″)
Host side: USB-C Connector
Device side: USB-A and MicroUSB
Power Consumption: 0.15W
Power Supply: No external supply required.
What’s included
1x BugBlat miniSniffer
1x Cross-Platform Analysis Software
Reviews
There are no reviews yet.