USBNinja

USBNinja

Emulating keyboard and mouse actions, payloads are completely customisable, and can be highly targeted.
Undetectable by firewalls, AV software or visual inspection, the USBNinja is an ideal tool for penetration testers, police and government.

Functionality in a glance
Undetectable
Invisible to firewalls, anti-virus and visual inspection.

Highly targetable
Customise payloads to match specific environments.

Wireless triggering
Payload can be triggered wirelessly at any time.

What’s Included
The USBNinja is available individually or in packs.

Usage Instructions
The USBNinja has three distinct modes:

Programming
Because the device acts as a standard USB cable, it needs to be pushed into programming / DFU mode. This is done by using the “Programming Ring”.

The Programming Ring must be placed on the host-side plug within three seconds of being connected to the programming / host computer.

This will place the device in programming mode, and allow for payloads to be uploaded to the device.

Programming is possible via the standard Arduino IDE.

Deployed
The device is ‘Deployed’ when it is connected to the target machine.
It will operate as a standard USB cable, allowing for data transfer and power transfer. It is able to stay in this state indefinitely until it is triggered.

Triggered
The device is triggered wirelessly via Bluetooth. It can be triggered by smartphone, or by dedicated remote control.

Typical smartphone trigger distance is up to 7 meters.
Typical remote control trigger distance is up to 50 meters.

Technical Specifications
Cable Physical Characteristics
Length: 1 m
Color: white
Connector options: Micro-USB, USB Type-C, Lightning
Voltage range: 4-25 V (supports fast charging)
Current consumption: 10 mA (typical)
Full-rate USB data transmission
Remote Control
High-powered Bluetooth wireless (customizable name and password)
Battery: 3.6 V, 40 mAh, rechargeable
Standby current: 80 μA
Transmission current: 30 mA
Range (under ideal conditions with antenna):
30 m with 2 dBi, 3 cm antenna
50 m with 3 dBi, 11 cm antenna
100 m with 18 dBi directional panel antenna
Mobile App
Alternative to remote control for triggering payload
Open source and freely available
Programming
Payload programmable with standard Arduino IDE (Windows/Mac/Linux/Android)
Access bootloader with non-contact magnetic ring
Source code provided for example payload

Individual Standard Kit Complete Pack
Version 1 Cable
USB-C / MicroUSB / Lightning 1 Cable
USB-C / MicroUSB / Lightning 3 Cables
USB-C & MicroUSB & Lightning
Remote No Yes Yes
Programming Ring Yes Yes Yes